Home > Knowledge > Content
The role of the conditioner in the production of processed feed by the cattle feed pellet machine
- Oct 11, 2018 -

The conditioner is a key supporting device for the cattle feed pellet machine. It plays an important role in the production of processed feed by the cattle feed pellet machine. Firstly, it can cure the powdery material, and also promote the heat denaturation of the protein in the material, and the denatured protein is easily hydrolyzed, thereby improving the digestion and utilization rate of the pellet feed.

 

Secondly, the conditioner in the beef feed pellet machine can also sterilize the powdered material to ensure the feed hygiene level. The method of sterilizing the material by the conditioner is compared with the drug prevention. Low cost, no pollution, no drug residues and side effects.

 

At the same time, the quenching and tempering equipment can significantly improve the water resistance of the pellet feed produced by the cattle feed pellet machine. In the process of quenching and tempering, the gelatinized starch and denatured protein in the material can fully exert the binder by the hydrothermal action of the steam. The function of the other components can effectively bond the surrounding components. Under the action of the compression of the compression molding roller, the particles and the particles are more closely combined with each other, so that the pellet feed becomes more dense and the appearance is smooth and clean during the feeding process. Not easily eroded by water, increasing the stability of the water.

 

In addition, the quenching and tempering equipment can also improve the granulating property of the material, increase the yield, save the energy consumption of the pellets of the cattle feed pellets, and improve the life of the granulator die and the pressure roller. Through quenching and tempering, the material is softened and more malleable. During the extrusion process with the die wall, the inner wall of the die and the outer surface of the press roll, the frictional force is reduced, and a large amount of mechanical energy is converted into heat energy during the granulation process. At the same time, the wear of the stamper and the press roll is slowed down.

https://www.china-hqpelletmill.com/