Home > Knowledge > Content
Mill precautions
- Jun 27, 2018 -

1. In order to make the Raymond Mill run normally, a "safety operation system for equipment maintenance" should be formulated to ensure the long-term safe operation of Raymond Mill. At the same time, the necessary maintenance tools and grease and corresponding accessories are necessary.

2. When the grinding roller device of Raymond Mill uses more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned. The damaged parts should be replaced in time. The fueling tool can be used manually.

3, Raymond Mill in the use of the process, there should be fixed staff responsible for the care, the operator must have a certain level of technology. Before the installation of Raymond Mill, the operator must carry out the necessary technical training so that they can understand the principle performance of Raymond Mill and be familiar with the operating procedures.

4. Raymond Mill should be overhauled after being used for a period of time. At the same time, the maintenance and replacement of the wearing parts such as the grinding roller ring blade shall be carried out. Before and after the use of the roller device, the connection bolts and nuts shall be carefully inspected to see if there is looseness and if the lubricating grease is added.