Home > Knowledge > Content
Main operational matters during maintenance of livestock feed pellet mill
- Oct 08, 2018 -

The livestock feed pellet mill is used to develop the wet powder into the desired granules, and the pulverized dry material can also be pulverized into the desired granules. The main feature is that the screen is easy to assemble and disassemble, and the elastic can be adjusted appropriately. It is easy to disassemble and easy to clean. When the equipment is under maintenance, the machine should be inspected regularly and once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable.


The livestock feed pellet mill should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body. After use or stop, take out the rotating drum to clean and brush the remaining powder in the bucket, then install it and prepare for the next use.


If it is found that the livestock feed pellet mill drum is moving before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make a sound, and turn the pulley by hand. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.