Home > Knowledge > Content
Feed granulator use and performance characteristics
- Sep 29, 2018 -

Feed granulators are widely used in large, medium and small aquaculture, grain and feed processing plants, livestock farms, poultry farms. The feed granulator has simple structure, wide adaptability, small floor space and low noise. It can be granulated without adding a little liquid. Therefore, the moisture content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage.


The use of feed granulator can obtain higher economic benefits. The produced feed pellets have high hardness, smooth surface and internal ripening, which can improve the digestion and absorption of nutrients. The process of particle formation can cause pancreatic enzyme resistance factors in grains and beans. Denaturation, reducing adverse effects on digestion, killing various parasite eggs and other pathogenic microorganisms, reducing various insect and digestive diseases.


When using the feed granulator, first take 3-10 kg of mixed powdered feed, add 10% edible oil and mix thoroughly, and open the oil block by hand, first add the feed, start the machine and adjust the pressure roller bolt with a wrench. , until the normal discharge. The oily feed is repeatedly squeezed 3-5 times in the machine, and then gradually added dry material.


After adding the dry material, if you hear the mechanical boring, you should loosen the pressure roller bolt a little and release it normally. If the oiled material is not pressed out, or the dry material is placed, the pellet machine does not discharge, and the steel nail is used to expose the feed in the mold plate, and then re-run. The length of the pellets is adjusted by adjusting the cutter provided on the edge of the discharge port; the processed pellets have a relatively high temperature and should be placed in a ventilated place, and can be stored in a bag after being cooled to room temperature.