Home > Knowledge > Content
Commissioning process for poultry feed pellet machine and washing requirements
- Dec 12, 2018 -

In the process of commissioning the poultry feed pellet machine, it is first necessary to understand the process flow of the pellet feed production line and understand the function of each specific equipment in the process flow, and it is necessary to check the operation of a specific equipment one by one before commissioning, and Understand the pulverization particle size of the pulverizer matched with the die hole of the granulator used. The material size should be fine, but it should not be too fine. It is best to be coarse, medium and fine.

The poultry feed pellet machine needs to be washed before the commissioning, and the stones and welding slag left by the installation are removed to a certain extent. The whole equipment needs to be checked whether the steam piping system used has good before debugging. The decompression function and the hydrophobic function ensure the dry and saturated quenching steam required for granulation, and ensure that there is always 0.058-0.4MPA of steam after the pressure reducing valve.

The poultry feed pellet machine should adjust the distance between the pressure roller and the ring die before starting the granulator. Generally, when the ring die is rotated, the pressure roller turns non-rotating (that is, the distance between the pressure roller and the ring die is 0.1~0.4MM is the best). Do not adjust the distance between the ring mold and the pressure roller too small, resulting in direct friction, which will not only accelerate the wear of the ring mold and the pressure roller, but also reduce the unit yield during production.

https://www.china-hqpelletmill.com/